Presenting TPI F1F2610CA1 that is 10 KW Single Pole Downflow Unit Heater. This unit is made using 16 Gauge steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door. It comes equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur. This heater is equipped with fan purge which allows fan to operate after elements are de-energized to purge residual heat.
| TPI 10 KW Single Pole Downflow Unit Heater F1F2610CA1 Specifications |
|---|
| Power | 10 KW |
|---|
| BTU's | 34140 |
|---|
| Volts | 208 |
|---|
| Phase | 1 |
|---|
| Amps | 48.1 |
|---|
| Control Volts | 24 |
|---|
| Temp Rise | 26 F |
|---|
| CFM | 1200 |
|---|
| Weight | 75 Lbs. |
|---|
| UPC | 686334715898 |
|---|
TPI 10 KW Single Pole Downflow Unit Heater F1F2610CA1 Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout.
- Totally enclosed motor.
- Pilot light (power on indicator)
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Minimum mounting height is 7.5' for all units
- ABS Type Approved
