25 KW 5100 Series Suspended Fan Forced Unit Heater - TPI F3F5125CA1L - 85.3 BTU

Fan Forced Wall Heaters - 25 KW 5100 Series Suspended Fan Forced Unit Heater - TPI F3F5125CA1L - 85.3 BTU

We introduce you to 25 KW 5100 Series Suspended Fan Forced Unit Heater by TPI. Model F3F5125CA1L is equipped with 85.3 BTU, totally enclosed, 2-speed, 1-phase, permanently lubricated and thermally protected motors with sleeve; automatic reset type limit and optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 degree -90 degree F. This unique unit is designed for two stage heating operation.

TPI 25 KW Suspended Fan Forced Unit Heater F3F5125CA1L Features:

CONSTRUCTION:

• 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation and maintenance.

HEATING ELEMENT:

• Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow

OVERHEAT PROTECTION:

• Equipped with automatic reset type limit.

FAN and MOTOR:

• Totally enclosed, 2-speed, 1-phase, permanently lubricated and thermally protected motors with sleeve.
• Fan over-ride purges unit of residual heat at shutdown

LOUVER ASSEMBLY:

• Louvers are individually adjustable for directional control of air flow up to 15 degree from straight horizontal
• Optional diffusers available for down flow (vertical discharge) applications

TEMPERATURE CONTROLS:

• Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 degree -90 degree F
• Designed for two stage heating operation.

INSTALLATION:

• Unit Heaters can be mounted for horizontal or vertical discharge
• Suggested for applications up to 6000 feet.

FIELD INSTALLED OPTIONS:

• In-Built or wall mounted temperature control thermostats - low or line voltage
• Summer fan switch to operate the fan only.
• Power disconnect switch
• Heat stratification thermostat