25 KW Downflow Unit Heater - TPI F3F2625CA1 - 85325 BTU

Downflow Unit Heaters - 25 KW Downflow Unit Heater - TPI F3F2625CA1 - 85325 BTU

25 KW Downflow Unit Heater with 85325 BTU is one of the most-selling heaters by TPI. Model F3F2625CA1 features totally enclosed, 2 speed, 1 phase permanently lubricated, thermally protected motors with sleeve, in-built 24 volt transformer for low voltage remote thermostat application, in-built disconnect and axial flow fan blade with 1570 RPM max. It may operate as 2 stage heaters if 2 stage remote thermostat is used.

TPI 25 KW Downflow Unit Heater F3F2625CA1 Features:

CONSTRUCTION:

• 16 ga. steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door
• OSHA guards standard

HEATING ELEMENT:

• Corrosion resistant element with steel sheath and steel spiral fins

OVERHEAT PROTECTION:

• Equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur.

FAN and MOTOR:

• Totally enclosed, 2 speed, 1 phase permanently lubricated, thermally protected motors with sleeve.
• Axial flow fan blade - 1570 RPM max.
• Equipped with fan purge which allows fan to operate after elements are de-energized to purge residual heat

TEMPERATURE CONTROLS:

• In-Built 24 volt transformer for low voltage remote thermostat application
• May operate as 2 stage heaters if 2 stage remote thermostat is used

DISCONNECT SWITCH:

• Equipped with in-built disconnect

INSTALLATION:

• Unit can be mounted using optional mounting bracket or field constructed angle iron bracket
• Not recommended for mounting with threaded rod or chain