30 KW 5100 Series Suspended Fan Forced Unit Heater - TPI F3F5130CA1L - 102.4 BTU |
|
Fan Forced Wall Heaters - 30 KW 5100 Series Suspended Fan Forced Unit Heater - TPI F3F5130CA1L - 102.4 BTUPresenting 5100 Series Suspended Fan Forced Unit Heater with 30 KW and 102.4 BTU. TPI F3F5130CA1L comprises of in-built or wall mounted temperature control thermostats, summer fan switch to operate the fan, power disconnect switch, heat stratification thermostat and 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door simplifying wiring, installation and maintenance. | TPI 30 KW Suspended Fan Forced Unit Heater F3F5130CA1L Specifications |
|---|
| UPC | 686334645423 |
|---|
| KW | 30 |
|---|
| BTU / H | 102.4 |
|---|
| VOLTS | 208 |
|---|
| PHASE | 3 |
|---|
| AMPS | 83.4 |
|---|
| Control Voltage | 24 |
|---|
| Temperature Rise | 47 / 53 F |
|---|
| Air Throw | 40' |
|---|
| CFM | 2000/1800 |
|---|
| Recommended Mounting Height (Horizontal) | 12' |
|---|
| Recommended Mounting Height (Vertical) | 20' |
|---|
| Weight | 120 Lbs. |
|---|
TPI 30 KW Suspended Fan Forced Unit Heater F3F5130CA1L Features: CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation and maintenance.
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with automatic reset type limit.
FAN and MOTOR: - Totally enclosed, 2-speed, 1-phase, permanently lubricated and thermally protected motors with sleeve.
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 degree from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 degree -90 degree F
- Designed for two stage heating operation.
INSTALLATION: - Unit Heaters can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet.
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
|
