Electric Forced Air Heaters - 7500 W, 25.6 BTU 24-5/16" 5100 Series Unit Heater - TPI G1G5107CA1L
The Electric Forced Air Heaters made by TPI are great way to add warmth and comfort to any room. Model G1G5107CA1L is 7500 W, 24-5/16" high 5100 Series Unit Heater. It gives an 25.6 BTU output. The model has 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door which simplify wiring, installation and maintenance. The 5100 series heaters are suggested for applications up to 6000 feet.
| 5100 Series Unit Heater - 25.6 BTU - TPI G1G5107CA1L Specifications |
|---|
| BTU | 25.6 |
|---|
| KW | 7.5 KW |
|---|
| TEMP RISE | 34 F |
|---|
| CFM | 700 |
|---|
| Amps. | 27.1 |
|---|
| Phase | 1 PH |
|---|
| Air throw | 22' |
|---|
| Voltage | 277V |
|---|
| Recommended Mounting Height Hortz | 10' |
|---|
| Recommended Mounting Height Vert | 12' |
|---|
| Product Dimension | 24-5/16"H x 21-1/2"W x 6-1/2"D |
|---|
| Weight | 54 Lbs. |
|---|
| UPC | 686334645928 |
|---|
5100 Series Unit Heater - 25.6 BTU - TPI G1G5107CA1L Features:
CONSTRUCTION:
- 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT:
- Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION:
- This 7.5 KW unit equipped with automatic reset type limit.
FAN and MOTOR:
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit this 7.5 KW model.
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY:
- Louvers are individually adjustable for directional control of air flow up to 15 Deg. from straight horizontal.
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS:
- Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50 deg -90 deg F
- Units with model numbers ending in CA1 are factory wired for low voltage controls
INSTALLATION:
- This unit heaters can be mounted for horizontal or vertical discharge
- 5100 series suggested for applications up to 6000 feet; for applications up to or above 6000 feet see UH series.
FIELD INSTALLED OPTIONS:
- In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- UL listed
