Electric Fan Forced Hazardous Location Unit Heater - QMARK X15004832B - 51,180 BTU |
|
Commercial / Warehouse Heaters - Electric Fan Forced Hazardous Location Unit Heater - QMARK X15004832B - 51,180 BTUBuy QMARK Electric Fan Forced Hazardous Location Unit Heater from our online store to get relief from winters. Model X15004832B consumes 15 KW energy and output of 51,180 BTU/Hr. The heater has many built-In features like explosion proof motor, built In thermostat, fan selector switch and pilot light. It includes steel tubes, aluminum fins and a non toxic heat transfer fluid. This unit is made up of heavy gauge steel with gray powder coated finish. Choose this heater and chase away winter's chill for good! | QMARK Electric Fan Unit Heater X15004832B - Specifications |
|---|
| Item | Electric Fan Forced Heater |
|---|
| Type | Hazardous Location Unit Heater |
|---|
| kW | 15 |
|---|
| BTUH | 51180 |
|---|
| Voltage | 480 |
|---|
| Hz | 60 |
|---|
| Phase | 3 |
|---|
| Amps AC | 18.7 |
|---|
| Contactor Coil Voltage | 24 |
|---|
| Overall Dimension | 25" L x 27-7/8" W x 21" D |
|---|
| Cabinet Dimension | 25" L x 27-7/8" W x 11-1/9" D |
|---|
| Housing Material | Heavy Gauge Steel |
|---|
| Housing Finish | Gray Powder Coated |
|---|
| CFM | 1450 |
|---|
| Built-In Features | Ball Bearing Permanently Lubricated Explosion Proof Motor, Manual Reset High Limit Cutout, Built In Thermostat, Disconnect Switch, Fan Selector Switch, 120V Control Circuit, And Pilot Light |
|---|
| Requires | Field supplied Mounting Hardware |
|---|
| Includes | Steel Tubes, Aluminum Fins and a Non Toxic Heat Transfer Fluid, Automatic Reset Thermal Limit, 24V Control Circuit Transformer |
|---|
| Agency Compliance | UL & C-UL For, Class I, Group C & D, Division 1 & 2, Class II, Groups E, F & G, T3B - 165 C (329 F) |
|---|
| Warranty Length | 1 Year |
|---|
|
