Electric Fan Forced Hazardous Location Unit Heater - QMARK X7504832B - 25,590 BTU |
|
Commercial / Warehouse Heaters - Electric Fan Forced Hazardous Location Unit Heater - QMARK X7504832B - 25,590 BTUWhen the weather turns frosty, keep your indoor or outdoor workspace warm and cozy with theElectric Fan ForcedHazardous Location Unit Heater manufactured by QMARK. Model X7504832B consumes 7.5 KW energyto give 25,590 BTU/Hr output. This unit is made up of heavy gauge steel with gray powder coated finish. The heater has many built-In features like explosion proof motor, built In thermostat, fan selector switchand pilot light. It includes steel tubes, aluminum fins and a non toxic heat transfer fluid. Buy NOW! | QMARK Electric Fan Unit Heater X7504832B - Specifications |
|---|
| Item | Electric Fan Forced Heater |
|---|
| Type | Hazardous Location Unit Heater |
|---|
| kW | 7.5 |
|---|
| BTUH | 25590 |
|---|
| Voltage | 480 |
|---|
| Hz | 60 |
|---|
| Phase | 3 |
|---|
| Amps AC | 9.7 |
|---|
| Contactor Coil Voltage | 24 |
|---|
| Overall Dimension | 19-1/8" L x 23-7/8" W x 21" D |
|---|
| Cabinet Dimension | 19-1/8" L x 23-7/8" W x 11-1/9" D |
|---|
| Housing Material | Heavy Gauge Steel |
|---|
| Housing Finish | Gray Powder Coated |
|---|
| CFM | 840 |
|---|
| Built-In Features | Ball Bearing Permanently Lubricated Explosion Proof Motor, Manual Reset High Limit Cutout, Built In Thermostat, Disconnect Switch, Fan Selector Switch, 120V Control Circuit, And Pilot Light |
|---|
| Requires | Field supplied Mounting Hardware |
|---|
| Includes | Steel Tubes, Aluminum Fins and a Non Toxic Heat Transfer Fluid, Automatic Reset Thermal Limit, 24V Control Circuit Transformer |
|---|
| Agency Compliance | UL & C-UL For, Class I, Group C & D, Division 1 & 2, Class II, Groups E, F & G, T3B - 165 C (329 F) |
|---|
| Warranty Length | 1 Year |
|---|
|
