Search:
Home > Heaters > Forced Air Heaters > Electric Forced Air Heaters >

Fan Forced Horizontal Discharge Unit Heater H1HUH20CA1

Fan Forced Horizontal Discharge Unit Heater H1HUH20CA1
Fan Forced Horizontal Discharge Unit Heater H1HUH20CA1
SKU: H1HUH20CA1
Manufacturer: TPI Corporation Heaters
BTU /hr.:
68300
Fuel Type:
Electric
Voltage:
240 V

HeaterStore or any of it's affliates are not responsible for damages or injury caused by wrongful installation or application of this product.


Availability: Out of Stock
notify me
Retail: $2,991.00 Price: $1,645.05 You Save: $1,345.95 (45.0%)
 




    Description

    Electric Forced Air Heaters - TPI 20KW 240V Fan Forced Horizontal Discharge Unit Heater - 68300 BTU - H1HUH20CA1

    Bring the warmth of sunshine indoors with H1HUH20CA1 which is a perfect blend of highest quality, exceptional service and value. TPI presents 20KW 240V Fan Forced Horizontal Discharge Unit Heater with 68300 Btu capacity. It has 18 ga. steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation & maintenance. This unit comes with circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade

    TPI Fan Forced Washdown Unit Heater H1HUH20CA1 Specifications
    BTU68300
    KW20
    Volts240
    Phase1
    AMPS83.3
    Control volts24
    Temp. Rise47 deg F
    Air throw56'
    CFM1350
    Mounting Height13'
    Weight55 Lbs.
    UPC686334688420

    TPI Fan Forced Washdown Unit Heater H1HUH20CA1 Features:

      CONSTRUCTION:
    • 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
    • HEATING ELEMENT:
    • Circular copper clad steel element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade
    • OVERHEAT PROTECTION:
    • This unit come equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
    • FAN and MOTOR:
    • Mounted with rubber insulators to minimize vibration and noise
    • Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.
    • LOUVER ASSEMBLY:
    • Louvers are individually adjustable for directional control of air flow and the louver assembly can be repositioned in the field from down air flow to right or left directional air flow.
    • Temperature Controls
    • Built in 24 volt transformer for low voltage remote thermostat application
    • INSTALLATION:
    • It may be mounted at a maximum of 45 degrees off of horizontal
    • 5/16" threaded rod may be used
    • Optional wall / ceiling mounting brackets available.
    • Suitable for applications up to 13, 000 feet
    • FACTORY INSTALLED OPTIONS:
    • Summer fan switch to operate the fan only.
    • Fan Delay Switch to purge all residual heat from the unit after the heating element has cycled off
    • Powder coated Epoxy finish is available
    • Disconnect switch
    • ETL listed
    TPI Fan Forced Washdown Unit Heater H1HUH20CA1
    Additional Information

    TPI Fan Forced Horizontal Discharge Unit Heater H1HUH20CA1 Resources:

    TPI Fan Forced Horizontal Discharge Unit Heater H1HUH20CA1 Specifications