Commercial/Warehouse Heaters - Power Vented Natural Gas Unit Heater w/ Belt Driven Blower - Dayton 2HYW1 - 80000 Btu
Presenting the new Power Vented Natural Gas Unit Heater with Belt Driven Blower from Dayton. Model no 2HYW1 has a electronic spark ignition system. The Power venting allows horizontal venting through side walls. The Vent position is field-adjustable for horizontal or vertical venting. The removable burner can be accessed from the panel for fast, easy inspection and maintenance. The fan time delay eliminates cold air at startup. This unit require 8 ft. of clearance to the bottom of the heater. It is CSA Certified.
| Dayton Power Vented Natural Gas Unit Heater 2HYW1 Specifications |
|---|
| Item | Unit Heater |
|---|
| Type | Power Vented, Electronic Ignition, With Belt Driven Blower |
|---|
| Fuel Type | Natural Gas |
|---|
| BtuH Input | 100000 |
|---|
| BtuH Output | 80000 |
|---|
| Voltage | 120 V |
|---|
| Frequency | 60 Hz |
|---|
| Full Load Amps | 8.3 |
|---|
| CFM | 1200 |
|---|
| Air Temp. Rise | 62 F |
|---|
| Free Air (CFM) | 1200 |
|---|
| 65F Rise (CFM) | 1140 |
|---|
| 80(F) Rise (CFM) | 925 |
|---|
| Gas Connection | 1/2" |
|---|
| Flue Dia. | 4" |
|---|
| Product Dimensions | 34-1/8"H x 17-7/8"W x 42-5/8"D |
|---|
| O.C. Mounting | 14-1/2" |
|---|
| Installation Height | 8 to 12 Ft. |
|---|
| Ignition System | Intermittent Spark |
|---|
| Indoor Air Discharge Height | 18" |
|---|
| Indoor Air Discharge Width | 15-3/8" |
|---|
| Max. External SP (In. WC) | 0.2 |
|---|
| Requires | 24V Thermostat |
|---|
| Primary Heat Exchanger Material | 20 Gauge Aluminized Steel |
|---|
| Application | More Than 2000' Above Sea Level Require Burner Orifices To Be Derated |
|---|
| Agency Compliance | CSA |
|---|
| Warranty | 1 Year All Components |
|---|
| Note: Use single- or double-wall vent pipe when venting vertically, or single-wall pipe when venting horizontally |