Commercial/Warehouse Heaters - Power Vented Propane Unit Heater w/ Belt Driven Blower - Dayton 4DG24 - 320000 Btu
Bringing you Power Vented Propane Unit Heater w/ Belt Driven Blower manufactured by Dayton. Model no. 4DG24 comes with a 320000 Btu heating output. This product uses outside air for combustion, enabling operation in areas having slight negative pressures with no adverse effect upon combustion or venting. This product is made out of 20 Gauge Aluminized Steel. It also requires a 24V thermostat that keeps the temperature stable. The manufacturer also provides 1 year all component warranty and CSA approval to keep you tension free and make full use of your heater.
| Dayton Power Vented Propane Unit Heater 4DG24 Specifications |
|---|
| Item | Unit Heater |
|---|
| Type | Power Vented, Separated Combustion With Belt Drive Blower |
|---|
| Fuel Type | Propane |
|---|
| BtuH Input | 400000 |
|---|
| BtuH Output | 320000 |
|---|
| Voltage | 120 V |
|---|
| Frequency | 60 Hz |
|---|
| Full Load Amps | 15.4 |
|---|
| CFM | 4800 |
|---|
| Air Temp. Rise | 62 F |
|---|
| Free Air (CFM) | 4800 |
|---|
| Gas Connection | 3/4" |
|---|
| Flue Dia. | 6" |
|---|
| Product Dimensions | 39-1/16"H x 48-1/8"W x 51"D |
|---|
| O.C. Mounting | 45" |
|---|
| Installation Height | 8 to 20 Ft. |
|---|
| Ignition System | Intermittent Spark |
|---|
| Indoor Air Discharge Height | 18" |
|---|
| Indoor Air Discharge Width | 45-5/8" |
|---|
| Max. External SP (In. WC) | 0.2 |
|---|
| Requires | 24V Thermostat |
|---|
| Primary Heat Exchanger Material | 20 Gauge Aluminized Steel |
|---|
| Burner Air Inlet Size | 6 |
|---|
| Application | More Than 2000' Above Sea Level Require Burner Orifices To Be Derated |
|---|
| Agency Compliance | CSA |
|---|
| Warranty | 1 Year All Components |
|---|
| Note: For applications in altitudes above 2000 ft., the burner orifices need to be derated. Consult a qualified contractor or call your local branch to order orifices |